|
|
|
Planning
 |
Tue. 24 | Wed. 25 | Thu. 26 |
|
08:00
09:00
10:00
11:00
12:00
13:00
14:00
15:00
16:00
17:00
18:00
19:00
20:00
21:00
22:00
23:00
|
8:30 - 9:00 (30min)
Welcome
 Karré break room
9:00 - 9:20 (20min)
Welcome
Auditorium
UBS president - IRDL president
9:20 - 10:35 (1h15)
Surface Tension 1
Auditorium
› Thermophysical properties of Al-Mg and Al-Cr based additive manufacturing alloys
- Xiao Xiao, Sun Yat-sen University
09:20-09:45 (25min)
› Thermophysical properties of liquid Al-Ti-V alloys measured by electromagnetic levitation
- Benedikt Reiplinger, Institute of Materials Physics in Space (German Aerospace Center)
09:45-10:10 (25min)
› Time-Resolved and in-situ Measurements of Liquid Properties Using the VITI Induction Furnace and Maximum Bubble Pressure Apparatus
- Hugo Bitard, Laboratoire d'Etudes et d'Expérimentation pour les Accidents Graves
10:10-10:35 (25min)
10:35 - 11:05 (30min)
Coffee break
Karré break room
11:05 - 12:20 (1h15)
Conductivity - Diffusivity - Flash 1
Auditorium
› Measuring Thermal Conductivity and Emittance at Ultrahigh Temperatures (> 2500°C)
- Golightly Elizabeth
11:05-11:30 (25min)
› Non-Contact Method to Measure Thermal Conductivity at High Temperatures: A Comparative Study of Additive Manufactured SS-316L
- Jessica Reyes, University of Virginia
11:30-11:55 (25min)
› Estimating the thermal diffusivity of molten metals at very high temperature by liquid thin film method
- Thomas PIERRE, IRDL
11:55-12:20 (25min)
12:20 - 13:35 (1h15)
Lunch
13:35 - 15:15 (1h40)
Calorimetry
Auditorium
› LNE initiatives in the development of metrological reference facilities for specific heat measurements at high temperatures
- Refat RAZOUK, Laboratoire National de Métrologie et d'Essais
13:35-14:00 (25min)
› Optimizing Measurements of Thermal Conductivity by Non-Contact Modulation Calorimetry in Electromagnetic Levitation
- Robert Hyers, Worcester Polytechnic Institute
14:00-14:25 (25min)
› Measurement of the properties of molten metals with electromagnetic levitation: effect of application of the horizontal DC magnetic field
- Olga Budenkova, Science et Ingénierie des Matériaux et Procédés
14:25-14:50 (25min)
› Estimation of the specific heat capacity of liquid metals by aerodynamic levitation
- Maelenn Le Mener, Institut de Recherche Dupuy de Lôme
14:50-15:15 (25min)
15:15 - 15:45 (30min)
Coffee break
Karré break room
15:45 - 17:25 (1h40)
Viscosity
Auditorium
› Numerical simulation to study the impact of gravity on viscosity determination through the aerodynamic levitation of a metal drop
- ELODIE COURTOIS, Institut de Recherche Dupuy de Lôme
15:45-16:10 (25min)
› Effects of Gas Flow Rate and Sample Size on Surface Tension and Viscosity Measurements of High-temperature Melts using Aerodynamic Levitation Method
- Ikuma Nagakusa, Tohoku University, Institute of Multidisciplinary Research for Advanced Materials (IMRAM)
16:10-16:35 (25min)
› Thermophysical Properties of Undercooled Alloys within the Titanium-Zirconium-Nickel Alloy System
- Gwendolyn Bracker, Worcester Polytechnic Institute, Institute of Materials Physics in Space, German Aerospace Center
16:35-17:00 (25min)
› Viscosity measurement by the “Oscillating Drop” method: Limits of applicability
- Georg Lohöfer, German Aerospace Center
17:00-17:25 (25min)
18:00 - 19:00 (1h)
Submarine tour
Submarine "Flore" organized tour
|
8:30 - 9:00 (30min)
Welcome
Karré break room
9:00 - 10:40 (1h40)
Conductivity - Diffusivity - Flash 2
Auditorium
› Determination of the thermal properties of uranium dioxide at high temperatures using laser-based approaches
-
09:00-09:25 (25min)
› Modulated Laser Heating: the frequency domain thermoreflectance technique for the measurement of thermophysical properties
- Hans-W. Marx, Linseis Messgeräte GmbH
09:25-09:50 (25min)
› Nanosecond Pulsed-Light Heating Thermoreflectance Method for Thermal Diffusivity Measurements
- Dmitry Sergeev, Netzsch Gerätebau GmbH
09:50-10:15 (25min)
› SI-traceable thermal diffusivity measurements of advanced materials at ultra-high temperature
- Bruno HAY, Laboratoire National de Métrologie et d'Essais
10:15-10:40 (25min)
10:40 - 11:05 (25min)
Coffee break
Karré break room
11:05 - 12:20 (1h15)
Optical
Auditorium
› Characterization of thermo-optic coefficients in non-uniform temperature field
- Jordan Letessier, Institut de Mécanique et d'Ingénierie
11:05-11:30 (25min)
› High-temperature normal spectral emissivity of semiconducting ceramics
- Benoit Rousseau, LTEN
11:30-11:55 (25min)
› Normal spectral emissivity of Al-Ti liquid alloys
- Juergen Brillo, German Aerospace Center
11:55-12:20 (25min)
12:20 - 13:35 (1h15)
Lunch
Karré break room
13:35 - 15:15 (1h40)
Matter behaviour
Auditorium
› Validation of Evaporation Models for Cu, Cr and CuCr Alloy Under Varying Vacuum Conditions
- Deniz Libert, Institut de Recherche Dupuy de Lôme, Sciences et Ingénierie des Plasmas Réactifs et des Arcs, Vacuum Interrupteurs
13:35-14:00 (25min)
› Atomic diffusion in metallic melts and the influence of gravity
- Elke Sondermann, DLR Institut für Materialphysik im Weltraum
14:00-14:25 (25min)
› Experimental Uncertainty in Property Quantification: Measurement of Accuracy and Precision (MAP) Plots
- Douglas Matson, Tufts University
14:25-14:50 (25min)
› Investigation on the metal-oxide part of the U-Ce-O phase diagram at high temperature
- Caroline DENIER, Laboratoire d'étude de transfert des radioéléments, European Commission - Joint Research Centre [Karlsruhe]
14:50-15:15 (25min)
15:15 - 15:45 (30min)
Coffee break
Karré break room
15:45 - 17:25 (1h40)
Density
Auditorium
› Newly developed aerodynamic levitation device for neutron scattering experiments.
- Phillip Eckstein, DLR Institute of Materials Physics in Space
15:45-16:10 (25min)
› Density measurements of the metallic liquid phase formed during the stratification of the corium
- Alexandre Ranno, Université Paris Saclay, CEA
16:10-16:35 (25min)
› Aerodynamic levitation of liquid metal under high pressure to prevent evaporation. First results.
- Coline Bourges, IRDL
16:35-17:00 (25min)
› Thermophysical property measurement of Ti-Mo melts using electromagnetic levitation technique
- Masayoshi Adachi, Tohoku University, Institute of Multidisciplinary Research for Advanced Materials (IMRAM)
17:00-17:25 (25min)
19:30 - 23:00 (3h30)
Gala diner
Gala diner at Cité de la Voile
|
8:30 - 9:00 (30min)
Welcome
Karré break room
9:00 - 10:40 (1h40)
Surface Tension 2
Auditorium
› Characterization and comparison of 304L surface tension with aerodynamic levitation and maximum bubble pressure
- Marc Le Gal La Salle, Framatome, Institut de Recherche Dupuy de Lôme
09:00-09:25 (25min)
› High-temperature interaction of liquid Mg with bulk Ag and Ti vs porous 3D-printed Ti substrate: Influence of reactivity and substrate surface modification
- Sylwia Terlicka, Institute of Metallurgy and Materials Science, Polish Academy of Sciences (POLAND)
09:25-09:50 (25min)
› Oxygen Effects on the Surface Tension of Inconel 718
- Michael Michael SanSoucie, NASA Marshall Space Flight Center
09:50-10:15 (25min)
› Thermophysical properties measurement of metallic alloys in reduced gravity
- Jonas Valloton, University of Alberta
10:15-10:40 (25min)
10:40 - 11:00 (20min)
Coffee break
11:00 - 12:40 (1h40)
Conductivity - Diffusivity - Flash 3
Auditorium
› Measurement of Thermal Diffusivity, Thermal Conductivity, and Volumetric Heat Capacity Distribution Using Lock-in Thermography Periodic Heating Method: Application of Surface Heating and Surface Detection Method
- Sho Umeda, Nagoya University
11:00-11:25 (25min)
› Thermal diffusivity by laser-flash of a flexible thermal protection system for Mars entry
- Erhard Kaschnitz, Österreichisches Gießerei-Institut
11:25-11:50 (25min)
› Thermal Diffusivity Imaging of High-Thermal-Conductive Composites employing Undersampling in Lock-in Thermography
- Yudai Kaneko, Nagoya University
11:50-12:15 (25min)
› Development of a front face flash method for thermal monitoring of surface deposits and ageing of plasma facing components in Tokamaks
- Clément Monet-Vidonne, IUSTI UMR 7343
12:15-12:40 (25min)
12:40 - 12:50 (10min)
Closing word
Auditorium
12:50 - 13:50 (1h)
Lunch
14:00 - 16:00 (2h)
IRDL lab. tour
IRDL lab. tour
|
