|
|
|
Planning
Tuesday, June 24, 2025
| Time | Event | (+) |
| 08:30 - 09:00 | Welcome (Karré break room) | |
| 09:00 - 09:20 | Welcome (Auditorium) - UBS president - IRDL president | |
| 09:20 - 10:35 | Surface Tension 1 (Auditorium) | (+) |
| 09:20 - 09:45 | › Thermophysical properties of Al-Mg and Al-Cr based additive manufacturing alloys - Xiao Xiao, Sun Yat-sen University | |
| 09:45 - 10:10 | › Thermophysical properties of liquid Al-Ti-V alloys measured by electromagnetic levitation - Benedikt Reiplinger, Institute of Materials Physics in Space (German Aerospace Center) | |
| 10:10 - 10:35 | › Time-Resolved and in-situ Measurements of Liquid Properties Using the VITI Induction Furnace and Maximum Bubble Pressure Apparatus - Hugo Bitard, Laboratoire d'Etudes et d'Expérimentation pour les Accidents Graves | |
| 10:35 - 11:05 | Coffee break (Karré break room) | |
| 11:05 - 12:20 | Conductivity - Diffusivity - Flash 1 (Auditorium) | (+) |
| 11:05 - 11:30 | › Measuring Thermal Conductivity and Emittance at Ultrahigh Temperatures (> 2500°C) - Golightly Elizabeth | |
| 11:30 - 11:55 | › Non-Contact Method to Measure Thermal Conductivity at High Temperatures: A Comparative Study of Additive Manufactured SS-316L - Jessica Reyes, University of Virginia | |
| 11:55 - 12:20 | › Estimating the thermal diffusivity of molten metals at very high temperature by liquid thin film method - Thomas PIERRE, IRDL | |
| 12:20 - 13:35 | Lunch | |
| 13:35 - 15:15 | Calorimetry (Auditorium) | (+) |
| 13:35 - 14:00 | › LNE initiatives in the development of metrological reference facilities for specific heat measurements at high temperatures - Refat RAZOUK, Laboratoire National de Métrologie et d'Essais | |
| 14:00 - 14:25 | › Optimizing Measurements of Thermal Conductivity by Non-Contact Modulation Calorimetry in Electromagnetic Levitation - Robert Hyers, Worcester Polytechnic Institute | |
| 14:25 - 14:50 | › Measurement of the properties of molten metals with electromagnetic levitation: effect of application of the horizontal DC magnetic field - Olga Budenkova, Science et Ingénierie des Matériaux et Procédés | |
| 14:50 - 15:15 | › Estimation of the specific heat capacity of liquid metals by aerodynamic levitation - Maelenn Le Mener, Institut de Recherche Dupuy de Lôme | |
| 15:15 - 15:45 | Coffee break (Karré break room) | |
| 15:45 - 17:25 | Viscosity (Auditorium) | (+) |
| 15:45 - 16:10 | › Numerical simulation to study the impact of gravity on viscosity determination through the aerodynamic levitation of a metal drop - ELODIE COURTOIS, Institut de Recherche Dupuy de Lôme | |
| 16:10 - 16:35 | › Effects of Gas Flow Rate and Sample Size on Surface Tension and Viscosity Measurements of High-temperature Melts using Aerodynamic Levitation Method - Ikuma Nagakusa, Tohoku University, Institute of Multidisciplinary Research for Advanced Materials (IMRAM) | |
| 16:35 - 17:00 | › Thermophysical Properties of Undercooled Alloys within the Titanium-Zirconium-Nickel Alloy System - Gwendolyn Bracker, Worcester Polytechnic Institute, Institute of Materials Physics in Space, German Aerospace Center | |
| 17:00 - 17:25 | › Viscosity measurement by the “Oscillating Drop” method: Limits of applicability - Georg Lohöfer, German Aerospace Center | |
| 18:00 - 19:00 | Submarine tour - Submarine "Flore" organized tour |
Wednesday, June 25, 2025
| Time | Event | (+) |
| 08:30 - 09:00 | Welcome (Karré break room) | |
| 09:00 - 10:40 | Conductivity - Diffusivity - Flash 2 (Auditorium) | (+) |
| 09:00 - 09:25 | › Determination of the thermal properties of uranium dioxide at high temperatures using laser-based approaches - Thomas Doualle - CEA Cadarache | |
| 09:25 - 09:50 | › Modulated Laser Heating: the frequency domain thermoreflectance technique for the measurement of thermophysical properties - Hans-W. Marx, Linseis Messgeräte GmbH | |
| 09:50 - 10:15 | › Nanosecond Pulsed-Light Heating Thermoreflectance Method for Thermal Diffusivity Measurements - Dmitry Sergeev, Netzsch Gerätebau GmbH | |
| 10:15 - 10:40 | › SI-traceable thermal diffusivity measurements of advanced materials at ultra-high temperature - Bruno HAY, Laboratoire National de Métrologie et d'Essais | |
| 10:40 - 11:05 | Coffee break (Karré break room) | |
| 11:05 - 12:20 | Optical (Auditorium) | (+) |
| 11:05 - 11:30 | › Characterization of thermo-optic coefficients in non-uniform temperature field - Jordan Letessier, Institut de Mécanique et d'Ingénierie | |
| 11:30 - 11:55 | › High-temperature normal spectral emissivity of semiconducting ceramics - Benoit Rousseau, LTEN | |
| 11:55 - 12:20 | › Normal spectral emissivity of Al-Ti liquid alloys - Juergen Brillo, German Aerospace Center | |
| 12:20 - 13:35 | Lunch (Karré break room) | |
| 13:35 - 15:15 | Matter behaviour (Auditorium) | (+) |
| 13:35 - 14:00 | › Validation of Evaporation Models for Cu, Cr and CuCr Alloy Under Varying Vacuum Conditions - Deniz Libert, Institut de Recherche Dupuy de Lôme, Sciences et Ingénierie des Plasmas Réactifs et des Arcs, Vacuum Interrupteurs | |
| 14:00 - 14:25 | › Atomic diffusion in metallic melts and the influence of gravity - Elke Sondermann, DLR Institut für Materialphysik im Weltraum | |
| 14:25 - 14:50 | › Experimental Uncertainty in Property Quantification: Measurement of Accuracy and Precision (MAP) Plots - Douglas Matson, Tufts University | |
| 14:50 - 15:15 | › Investigation on the metal-oxide part of the U-Ce-O phase diagram at high temperature - Caroline DENIER, Laboratoire d'étude de transfert des radioéléments, European Commission - Joint Research Centre [Karlsruhe] | |
| 15:15 - 15:45 | Coffee break (Karré break room) | |
| 15:45 - 17:25 | Density (Auditorium) | (+) |
| 15:45 - 16:10 | › Newly developed aerodynamic levitation device for neutron scattering experiments. - Phillip Eckstein, DLR Institute of Materials Physics in Space | |
| 16:10 - 16:35 | › Density measurements of the metallic liquid phase formed during the stratification of the corium - Alexandre Ranno, Université Paris Saclay, CEA | |
| 16:35 - 17:00 | › Aerodynamic levitation of liquid metal under high pressure to prevent evaporation. First results. - Coline Bourges, IRDL | |
| 17:00 - 17:25 | › Thermophysical property measurement of Ti-Mo melts using electromagnetic levitation technique - Masayoshi Adachi, Tohoku University, Institute of Multidisciplinary Research for Advanced Materials (IMRAM) | |
| 19:30 - 23:00 | Gala diner - Gala diner at Cité de la Voile |
Thursday, June 26, 2025
| Time | Event | (+) |
| 08:30 - 09:00 | Welcome (Karré break room) | |
| 09:00 - 10:40 | Surface Tension 2 (Auditorium) | (+) |
| 09:00 - 09:25 | › Characterization and comparison of 304L surface tension with aerodynamic levitation and maximum bubble pressure - Marc Le Gal La Salle, Framatome, Institut de Recherche Dupuy de Lôme | |
| 09:25 - 09:50 | › High-temperature interaction of liquid Mg with bulk Ag and Ti vs porous 3D-printed Ti substrate: Influence of reactivity and substrate surface modification - Sylwia Terlicka, Institute of Metallurgy and Materials Science, Polish Academy of Sciences (POLAND) | |
| 09:50 - 10:15 | › Oxygen Effects on the Surface Tension of Inconel 718 - Michael Michael SanSoucie, NASA Marshall Space Flight Center | |
| 10:15 - 10:40 | › Thermophysical properties measurement of metallic alloys in reduced gravity - Jonas Valloton, University of Alberta | |
| 10:40 - 11:00 | Coffee break | |
| 11:00 - 12:40 | Conductivity - Diffusivity - Flash 3 (Auditorium) | (+) |
| 11:00 - 11:25 | › Measurement of Thermal Diffusivity, Thermal Conductivity, and Volumetric Heat Capacity Distribution Using Lock-in Thermography Periodic Heating Method: Application of Surface Heating and Surface Detection Method - Sho Umeda, Nagoya University | |
| 11:25 - 11:50 | › Thermal diffusivity by laser-flash of a flexible thermal protection system for Mars entry - Erhard Kaschnitz, Österreichisches Gießerei-Institut | |
| 11:50 - 12:15 | › Thermal Diffusivity Imaging of High-Thermal-Conductive Composites employing Undersampling in Lock-in Thermography - Yudai Kaneko, Nagoya University | |
| 12:15 - 12:40 | › Development of a front face flash method for thermal monitoring of surface deposits and ageing of plasma facing components in Tokamaks - Clément Monet-Vidonne, IUSTI UMR 7343 | |
| 12:40 - 12:50 | Closing word (Auditorium) | |
| 12:50 - 13:50 | Lunch | |
| 14:00 - 16:00 | IRDL lab. tour - IRDL lab. tour |
